Naviate Geotech features

Here you can find the overview of the available features in Naviate Geotech

Import FM Borehole

Import Borehole data as Cogo points from Field Manager. Locations and Methods automatically get the correct symbols according to local Geotechnical standards, using Point Description Key Sets.

Borehole Diagram

Import Borehole Diagrams for COGO Points in Plan, Profile or Section View with data from Field Manager.

Points from CSV

Imports Cogo Points from CSV file to form Stratum points. The CSV file can contain multiple columns for different Stratum layers at each point location. E.g. columns for Existing Ground, Clay, Sand and Bedrock Elevation.

Create Stratum

Create Stratum points from Borehole section diagrams from e.g. Field Manager or by specifying new points in a Profile View. E.g. new points for Clay, Sand or Bedrock Elevation.

Create Point Groups and Surfaces

Create Point Groups from selected Point Codes (Stratums) and optionally Surfaces from created Point Groups.

Edit Borehole Elevations

Select a COGO point and displays all COGO points in that location for editing elevations for different stratums.

Create Virtual Borehole Points

Creates a set of COGO points by selecting an existing Borehole Location and then creating a copy of that borehole in another location. This is used to improve the stratum surfaces.

Find/Create Missing Points

Finds Location Cogo Points where one code exists but another is missing and creates a COGO point in that same location with the same elevation. This is to fix where layers disappear from a Location/Borehole.

Create Solids

Create Solids from Borehole Points for visualisation in 3D and Profile View.

Create Profile View

Create Alignment, Surface Profiles and Profile View in one dialog. Optionally objects can be projected into the profile view, e.g. Cogo Points to display Borehole Diagrams or Solids to display stratums.

Create Piles

Create Piles between two surfaces, straight down or at an angle. The location of the top of the piles is taken from the selected points. The elevation of the top and bottom of the piles are calculated from the given surfaces.

Create Sheet Piles

Create a row of sheet piles along a line that can be either a 3D polyline or Feature line at the top of the sheet piles. The heights of the lower end of the sheet piles are calculated from a given surface.

Create Lime Columns

Creates lime columns in as solids between two surfaces. The elevations of the top and bottom are calculated from the selected surfaces.

Create Anchors

Create rock anchors supporting the Sheet Piles. Anchors are attached to a polyline or Feature line.

Create 3D Polylines from Piles

Creates 3D Polylines from pile, sheet pile and anchor objects.

Create Piles from Cogo Points

Create Piles from COGO points that have the Naviate Classification assigned and the correct properties set.

Create Profile Hatch

Creates hatches between two or more profile lines in a Profile View.